Dynamic Waveband Switching in WDM Mesh Networks Based on a Generic Auxiliary Graph Model

Waveband switching (WBS) is a promising technique to reduce the switching and transmission costs in the optical domain of a wavelength-division multiplexing (WDM) network. This paper considers the problem of provisioning dynamic traffic using WBS in a WDM mesh network. The network of interest is a homogeneous WBS network, where each node has the functionality of WBS. The problem is called the dynamic WBS problem, which involves searching waveband-routes or wavelength-routes for the dynamically arriving traffic requests. The objective is to minimize the total switching and transmission costs in the optical domain. To solve the dynamic WBS problem, an auxiliary graph model capturing the network state is proposed. Based on the auxiliary graph, two heuristic on-line WBS algorithms with different waveband grouping policies are proposed, namely the wavelength-first WBS algorithm based on the auxiliary graph (WFAUG) and the waveband-first WBS algorithm based on the auxiliary graph (BFAUG). Simulation results indicate that WBS is an attractive technique which reduces the overall switching and transmission costs by up to 30% in the network. The results also show that the WFAUG algorithm outperforms the BFAUG algorithm in terms of port savings and cost savings.     

实验应变／应力模态分析若干问题的进展评述

本文评述了实验应变／应力模态分析进展的若干基本问题。主要是：应变响应与位移响应的关系；应变频响函数矩阵的特点及其测量方法；应变模态的加权正交性及其识别方法；以及其他问题。     

155Mb／s时分光交换系统

本文介绍了国内第一个１５５Ｍｂ／ｓ时分光交换实验系统。系统以新型半导体光器件－半导体光开关门为核心构成，传输速度为１５５Ｍｂ／ｓ。     

双稳态孤子

对于具有一定形式非线性的薛定谔方程，存在单孤子解的多稳态，也就是说对于相同能量，单孤子具有不同的传输常数．本文以一非线住形式Ｌｉｎｅａｒ　Ｓｍｏｏｔｈ　Ｓｔｅｐ（ＬＳＳ）函数为例，对孤子的双稳态进行理论分析，并对其双稳态的光学转换进行数值模拟．     

The TDCPR Management Mode of Engineering Equipment

The Three Gorges Project is a very large project,and its structure is very complex.Interna-tional advanced engineering equipment is broadly used.The state of equipment running directly influ-ences project building qualities and limited time.According to the factud conditions of the Three Gor-ges Project,the characteristics of engineering equipment are analyzed.At the same time ,some theories about equipment management are induced ,and the TDCPR management mode of engineering equip-ment of the Three Gorges Project is put forwared in order to gain the aim of managing and using equip-ment well and speeding up the project construction.     

ATM协议的测试研究及其应用

协议一致性测试和互操作性测试是保证不同厂商的ＡＴＭ产品和服务实现完全的互通的重要技术手段，本文分析了ＡＴＭ协议的测试需求，提出了适合的测试结构和测试描述技术，并结合适配层协议ＣＰＡＡＬ５讨论了协议集成测试系统ＰＴＴＳ在ＡＴＭ协议测试中的应用。     

多棒高功率固体激光器动态模匹配研究

采用光学矩阵分析了多元热透镜谐振腔内模式的动态匹配特征,给出了平平腔参数调整的关系式,实验结果与理论分析相符,并在两棒连续Nd:YAG系统上得到0W～530W功率范围的稳定输出.     

帧中继交换技术

本文论述了帧中继交换的概念、标准，结构、特点网络式样及在互连网中的应用。     

分子振动态及其跃迁的激光相干控制

讨论了激光合成相干叠加态的原理及其性质 ,针对 XY2 型分子 ,证明了合成局域模振动的可行性 ,然后给出相干叠加态的跃迁几率特征 ,发现它仍表现出相干的特性 ,对之进行分析研究表明 ,分子的振动态具有可控性 ,态跃迁几率具有可控性。     

Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading

The optical method of caustics has been utilised to measure both the stress intensity factor for a crack lying along the interface of an aluminium/epoxy bimaterial specimen, and the mode mixity arising from the difference in the elastic properties across the interface. Measurements were carried out by using a novel modification to the method whereby caustics are produced and measured from both sides of the specimen, so compensating automatically for the distortion induced in the specimen due to misaligned loading fixtures. A flat reflective surface across the interface was obtained by adhering a reflective coating to the specimen. Verification that this coating does not affect measurement accuracy was obtained by comparing stress intensity factors measured from coated and uncoated monolithic aluminium specimens where good agreement was found to exist between both measurements.